Rieju e-Tango 2024-2026 Haymaker Graphics kit

The Haymaker Graphics-kit for the Rieju e-Tango lives up to its name. Like an uppercut to the face, this design leaves no one indifferent. The e-Tango is lively and spirited; the Haymaker design captures this explosiveness with graphics that seem to burst from the fairings.

A knockout visual impact for your Rieju e-Tango

Forget subtlety. The Haymaker design is here to stake its claim. It blends broken shapes, paint splashes, and strong lines to create a sense of controlled chaos.

• Aggressive Haymaker Design: A "Brawl" visual composition with sharp contrasts (often Red/Black/White, Yellow/Concrete Grey, or Multicolored "Trash Polka"). An urban and raw style that gives the Rieju e-Tango a "Street Fighter" attitude.
• Robust e-Tango 2024-2026 Templates: This kit is made for action. It fully covers the exposed areas of the Rieju (battery, perimeter frame, plastics), turning the bike into a compact and solid visual block.
• "Armor Tech" 450 Micron Vinyl: Built to take hits. This thick material is your best defense against falls, stones, and heavy wear. It keeps the colors bright and the "like new" look despite rough terrain use.
• Easy Bubble-Free Application: Installation is quick, like a swift fight. The honeycomb glue technology instantly expels air. You get a smooth and fierce result effortlessly.

Complete e-Tango kit contents:

A full graphic armor:

• Headlight plate and handlebar guards (Bad Boy Look)
• Front and rear mudguards
• Full covering of the battery and frame sides
• Swingarm and fork guards

Recommended finishes

For the Haymaker design, the Glossy finish enhances contrasts and gives a striking "Comics" feel. The Matte finish is perfect for a more "Underground" and raw look. The Holographic finish can add a surprise effect, like a spark at the moment of impact.

Follow these 4 simple steps to install your holographic decal kit on your 50cc motorcycle decal kit and achieve a professional finish:

1. Surface Preparation:

   Thoroughly clean the application area of your 50cc with a mild degreaser to remove dust, dirt, and oil traces. A clean surface is essential for your holographic decal kit to adhere properly.

2. Measuring and Marking:

   Accurately measure the area to be decorated on your 50cc motorcycle decal kit. Use a non-permanent pencil to lightly mark the outlines to help align the vinyl during application.

3. Applying the Vinyl/Sticker:

   Partially peel off the backing of the vinyl or sticker. Carefully position it on the marked area, then gradually remove the backing while smoothing the material with a squeegee or microfiber cloth to eliminate air bubbles and ensure perfect adhesion.

4. Finishing and Checking:

   Check that the vinyl is firmly fixed over the entire surface of your 50cc motorcycle decal kit. Remove the protective film and make any necessary touch-ups to highlight the unique effect of your holographic decal kit.