Rieju e-Tango 2024-2026 Graphics kit Illuzion

The Graphics-kit Illuzion for the Rieju e-Tango is much more than just a covering: it is a visual trap. The e-Tango is a bike elusive by its handling; the Illuzion design enhances this trait with graphics that seem to ripple and twist, making your passage unforgettable.

A kinetic effect for your Rieju e-Tango

Why settle for straight lines? The Illuzion design uses optical art (Op Art) to create depth on flat surfaces.

• Hypnotic Illuzion Design: Distorted checkerboards, angular spirals, and vortex effects (often in pure Black/White, Electric Cyan/Violet, or Yellow/Black "Danger"). A style that captures attention and gives a dizzying sense of speed to the Rieju e-Tango.
• Precise e-Tango 2024-2026 Templates: For the illusion to work, the fit must be perfect. Our templates hug the curves of the battery cover and vents, ensuring the patterns connect logically from one piece to another.
• "Armor Tech" 450 Micron Vinyl: The reality on the ground is tough. Our thick vinyl acts as a shield against impacts, rubbing, and scratches. It preserves the integrity of your decoration and the value of your bike.
• Easy Bubble-Free Application: Don’t be fooled by the complexity of the pattern, the application is simple. The honeycomb glue technology automatically expels air for a smooth and professional result.

Contents of the complete e-Tango kit:

A complete visual transformation:

• Headlight plate and handlebar guards (The center of the vortex)
• Front and rear mudguards
• Full covering of the battery and frame sides
• Swingarm and fork guards

Recommended finishes

For the Illuzion design, the Holographic finish is the ultimate choice: it adds a layer of color change that makes the optical effect even more "wild" and lively. The Matte finish is excellent for Black/White patterns, enhancing the pure graphic effect. The Glossy finish will give a "Liquid" look to the distortions.

Follow these 4 simple steps to install your holographic decal kit on your 50cc motorcycle decal kit and achieve a professional finish:

1. Surface Preparation:

   Thoroughly clean the application area of your 50cc with a mild degreaser to remove dust, dirt, and oil traces. A clean surface is essential for your holographic decal kit to adhere properly.

2. Measuring and Marking:

   Accurately measure the area to be decorated on your 50cc motorcycle decal kit. Use a non-permanent pencil to lightly mark the outlines to help align the vinyl during application.

3. Applying the Vinyl/Sticker:

   Partially peel off the backing of the vinyl or sticker. Carefully position it on the marked area, then gradually remove the backing while smoothing the material with a squeegee or microfiber cloth to eliminate air bubbles and ensure perfect adhesion.

4. Finishing and Checking:

   Check that the vinyl is firmly fixed over the entire surface of your 50cc motorcycle decal kit. Remove the protective film and make any necessary touch-ups to highlight the unique effect of your holographic decal kit.