Si vous cherchez à personnaliser votre scooter Piaggio Zip, ne cherchez pas plus loin que notre kit déco 50cc 100% perso. Fabriqué à partir de vinyle de qualité supérieure avec une colle extra forte, ce kit déco est conçu pour résister aux éléments et aux chocs tout en maintenant une apparence nette et brillante grâce à notre processus de laminage à chaud et à l'utilisation d'encres eco-solvent.
Vous pouvez choisir parmi une gamme d'options de vinyle et de finitions, notamment des options holographiques, pailletées, chromées, mates et brillantes pour donner à votre scooter une apparence unique. De plus, notre kit déco comprend des autocollants pour personnaliser votre scooter selon vos préférences, tels que des sponsors ou logos personnalisés, des numéros de course et même votre nom de pilote ou votre profil Instagram.
Le kit déco autocollants comprend également 3 autocollants de garde boue avant, 7 autocollants de face avant, 2 autocollants de couvre guidon, 2 autocollants de carénage arrière gauche, 2 autocollants de carénage arrière droit et 4 autocollants de tours de jante pour un look complet et cohérent. Obtenez le kit déco 50cc 100% perso pour votre scooter Piaggio Zip dès maintenant et faites-en une véritable extension de votre personnalité.
Here are the steps to follow to install a 50cc motorcycle graphic kit:
Preparation : Make sure you have all the necessary materials, including the decoration kit, a spatula, spray cleaner, a cutter or razor blade, and a hair dryer.
Cleaning : Thoroughly clean the areas where you want to install the decoration kit. Be sure to remove all dirt, dust, grease, etc.
Cutting : If necessary, use a razor blade or craft knife to trim the edges.
Apply the first piece: Slowly peel the backing from the first piece of the graphic kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.
Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.
Drying: Use a hair dryer to dry the vinyl and to ensure optimal adhesion.
Finishing : Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.
Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.
The manufacture of a motorcycle decoration kit includes several stages:
Validation of the customer model - The customer validates the design and colors of the decorative kit.
Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.
Drying - The printed vinyl is left to dry to ensure good adhesion.
Hot lamination of a protective film - The printed vinyl is covered with a 450 micron protective film to protect the print from scratches and weather damage.
Precise cuts - The cut-out shapes are precise thanks to improved tools for a perfect fit on the motorcycle.
Quality control - A quality inspection is carried out to ensure that the deco kit meets customer specifications and is free from defects.
Sending to customer - The decorative kit is sent to the customer with tracking and SMS notifications.