Bienvenue dans le monde du kit déco 50cc avec le Kit déco 50cc Valenti Racing SM Cold ! Nous sommes fiers de vous offrir un vinyle de haute qualité avec une colle extra forte et un laminage à chaud pour une protection optimale contre les rayons UV, les rayures et les chocs. Avec des options de personnalisation, vous pouvez modifier les couleurs, changer les sponsors, ajouter un nom de pilote, un numéro de course, des numéros chromés et des autocollants de fourche. Les options de vinyles sont également variées, avec des choix comme l'holographique, le chrome, le pailleté, le brillant et le mat. Nos autocollants sont également faciles à installer grâce à nos gabarits de découpes améliorées et offrent une impression haute définition pour des graphismes encore plus détaillés. Avec le kit déco complet livré, vous recevrez des autocollants pour la plaque phare, les garde-boues avant et arrière, les ouïes de radiateur gauche et droite, les fonds de plaques, le bras oscillant et les tours de jantes. Voici 5 points forts à retenir :
- Vinyle de haute qualité avec une colle extra forte et un laminage à chaud pour une protection optimale
- Options de personnalisation variées pour un kit déco unique
- Autocollants faciles à installer grâce à des gabarits de découpes améliorées
- Impression haute définition pour des graphismes encore plus détaillés
- Kit déco complet livré pour une installation facile sur votre moto 50cc.
Here are the steps to follow to install a 50cc motorcycle graphic kit:
Preparation : Make sure you have all the necessary materials, including the decoration kit, a spatula, spray cleaner, a cutter or razor blade, and a hair dryer.
Cleaning : Thoroughly clean the areas where you want to install the decoration kit. Be sure to remove all dirt, dust, grease, etc.
Cutting : If necessary, use a razor blade or craft knife to trim the edges.
Apply the first piece: Slowly peel the backing from the first piece of the graphic kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.
Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.
Drying: Use a hair dryer to dry the vinyl and to ensure optimal adhesion.
Finishing : Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.
Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.
The manufacture of a motorcycle decoration kit includes several stages:
Validation of the customer model - The customer validates the design and colors of the decorative kit.
Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.
Drying - The printed vinyl is left to dry to ensure good adhesion.
Hot lamination of a protective film - The printed vinyl is covered with a 450 micron protective film to protect the print from scratches and weather damage.
Precise cuts - The cut-out shapes are precise thanks to improved tools for a perfect fit on the motorcycle.
Quality control - A quality inspection is carried out to ensure that the deco kit meets customer specifications and is free from defects.
Sending to customer - The decorative kit is sent to the customer with tracking and SMS notifications.