Graphic decals 50cc Derbi Senda x-race 2003-2009 Army Neon

Do you want a flashier look for your Derbi Senda xrace 2003-2009? Then this 50cc Neon Deco Kit is made for you! With glow-in-the-dark graphics and vibrant colors, you'll be the king of the track. The quality is there with a high-end vinyl with a thickness of 450 microns and an extra strong glue for a perfect hold. Protect your motorcycle from scratches, impacts and bad weather with our high protection lamination. And the best? You can personalize the kit by adding your race number, rider name, fork guard stickers and changing colors and sponsors. Everything is possible ! With vinyl options such as holographic, chrome, glitter and matte, you can really make your motorcycle one of a kind.

The kit includes stickers for the sides, mudguards, headlight plate, plate bottoms, swingarms and rim surrounds. So don't hesitate any longer and add a touch of madness to your Derbi Senda xrace 2003-2009 with our 50cc Neon Deco Kit!

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation: Make sure you have all the necessary materials, including the decorating kit, spatula, spray cleaner, cutter or razor blade, and hair dryer.

Cleaning: Carefully clean the areas where you want to install the deco kit. Be sure to remove all dirt, dust, grease, etc.

Trimming: If necessary, use a razor blade or craft knife to trim the edges.

Apply the first part: Slowly peel the backing from the first part of the deco kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and ensure optimal adhesion.

Finishing: Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot Lamination of Protective Film - The printed vinyl is coated with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cutouts - The cutout shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality Control- A quality inspection is carried out to ensure that the deco kit conforms to customer specifications and is free from defects.

Sending to the customer - The decorative kit is sent to the customer with tracking and SMS notifications.