Graphic decals 50cc Gilera SMT 2011-2017 Army Fluid

Hello riders! Do you want to give a new look to your Gilera SMT 50cc from 2011-2017? The Fluid decoration kit is here to help you do it!

With its stickers for the sides, the bottom of the plates, the mudguards, the headlight plate, the swingarm and the rim rims, this decorative kit allows you to personalize your motorcycle with style. With a variety of colors and designs, you can create a unique look that's uniquely yours.

Made from high-quality vinyl, the Fluid Deco Kit is water, dust and UV resistant. Its extra strong glue and hot lamination provide ultimate protection against daily road wear and tear.

And if you want to personalize your graphics kit even more, you can add your driver name and race number. With Fluid, you can have a personalized decoration kit that truly reflects your personality.

Installation of the Fluid deco kit is easy and does not require technical skills. You can save money and look cool by doing it yourself!

So, guys and gals, take out your 2011-2017 Gilera SMT 50cc and express your style with the Fluid graphics kit. Whether you're riding in the city or on the trails, your motorcycle will stand out from the crowd with this unique graphics kit.

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation: Make sure you have all the necessary materials, including the decorating kit, spatula, spray cleaner, cutter or razor blade, and hair dryer.

Cleaning: Carefully clean the areas where you want to install the deco kit. Be sure to remove all dirt, dust, grease, etc.

Trimming: If necessary, use a razor blade or craft knife to trim the edges.

Apply the first part: Slowly peel the backing from the first part of the deco kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and ensure optimal adhesion.

Finishing: Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot Lamination of Protective Film - The printed vinyl is coated with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cutouts - The cutout shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality Control- A quality inspection is carried out to ensure that the deco kit conforms to customer specifications and is free from defects.

Sending to the customer - The decorative kit is sent to the customer with tracking and SMS notifications.