Graphic decals 50cc 50cc Gilera SMT 2018-2023 Army Velocity

The Velocity Graphic Kit for Gilera SMT 50cc 2018-2023 is the ultimate solution for customization to match your motorcycle! With futuristic designs and high-quality hot lamination, your vehicle will be protected from scratches and dings while looking incredible.

Vinyl options include holographic, chrome, glitter and matte designs, with HD printing for even more striking graphic details and vibrant colors. The kit includes stickers for the sides, base plates, air box, headlight plate, mudguards and rim surrounds. Stickers for the fork and fork guards are also available as an option.

Customize your bike to your liking with unlimited colors, editable sponsors and varied design options. With the Velocity Graphic Kit for Gilera SMT 50cc, you can ride in style!

5 points forts :

1. Futuristic designs
2. Hot lamination for maximum protection
3. Varied vinyl options
4. HD printing for vibrant colors and graphic details
5. Unlimited customization with editable colors and sponsors.

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation: Make sure you have all the necessary materials, including the decorating kit, spatula, spray cleaner, cutter or razor blade, and hair dryer.

Cleaning: Carefully clean the areas where you want to install the deco kit. Be sure to remove all dirt, dust, grease, etc.

Trimming: If necessary, use a razor blade or craft knife to trim the edges.

Apply the first part: Slowly peel the backing from the first part of the deco kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and ensure optimal adhesion.

Finishing: Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot Lamination of Protective Film - The printed vinyl is coated with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cutouts - The cutout shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality Control- A quality inspection is carried out to ensure that the deco kit conforms to customer specifications and is free from defects.

Sending to the customer - The decorative kit is sent to the customer with tracking and SMS notifications.