Deco kit 50cc - Aprilia, Beta, Derbi, Fantic, Gilera, Rieju, Sherco, Yamaha

Remove the old stickers:
Equip yourself with a hairdryer: Plug it in, turn it on, and then heat the sticker for 2 to 5 minutes. This softens the glue and makes it easier to peel off.
Takeoff: Use your nails or a fine blade (like a cutter) to gently lift the edges of the sticker.
Remove adhesive residues: If glue remains on the fairings, clean with:
Solvent (industrial or nail)
Degreaser or special plastic cleaner Apply with a clean cloth using light movements. ⚠️ Warning: Always test on a small area to avoid damaging the plastics.

Sort the pieces of the decoration kit:
Identify the parts corresponding to the right side and the left side of your motorcycle or scooter.
Preview:
Position each sticker in its place without removing the protective paper. This allows you to check the fit and identify any necessary cuts.
Adjust if necessary:
If excess stickers appear, carefully cut them out before applying.

Prepare the workspace:
Work in a clean, dust-free environment, sheltered from wind and sunlight. Ensure that the parts and the decoration kit are at room temperature (minimum 20 °C).
Disassemble the parts: For an optimal result, disassemble the fairings to be covered. This simplifies the gluing process and avoids mistakes.
Place the sticker: Start from the center: Slowly peel off the protective paper while sticking the sticker.
Eliminate air bubbles: Use a clean cloth or a squeegee, making movements from the center to the edges. For areas with reliefs, gently heat with a hairdryer or heat gun. This makes the sticker more flexible and suitable for the surface.

Final fixation: Once all the stickers are applied, gently heat them with a hairdryer while applying even pressure to activate the adhesive.
Let it rest: Wait at least 24 hours before using the motorcycle or scooter, so that the adhesive sets perfectly.
Eliminate the remaining air bubbles:
Pinch the center of the bubbles with a fine pin. Gently heat with a hairdryer while maintaining light pressure. The air will escape and the bubble will disappear.