Army 70-80 Am6 & Derbi exhaust, red silencer
Description
Army 70-80 exhaust for cylinders from 70 to 80cc. If you like big accelerations to make wheelies, this exhaust is made for you! Made entirely by hand with 20 pieces of steel sheet with a thickness of 0.8mm. The welds are made with perfection and the result is magnificent. With this Army exhaust, you will optimize the performance of your cylinder kit. Best cylinder with this exhaust: Metrakit Pro Race 70 and 80cc, Airsal 70 and 80, and top performance 70 to 80cc. Our exhausts are made in Spain by the best exhaust manufacturer in Europe.
- Type of manufacture: 100% hand-welded rolled
- Material: 0.8mm sheet steel
Warning: product not homologated on the road, any use on public roads is prohibited.How to install a decoration kit
Here are the steps to follow to install a 50cc motorcycle graphic kit:
Preparation: Make sure you have all the necessary materials, including the decorating kit, spatula, spray cleaner, cutter or razor blade, and hair dryer.
Cleaning: Carefully clean the areas where you want to install the deco kit. Be sure to remove all dirt, dust, grease, etc.
Trimming: If necessary, use a razor blade or craft knife to trim the edges.
Apply the first part: Slowly peel the backing from the first part of the deco kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.
Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.
Drying: Use a hair dryer to dry the vinyl and ensure optimal adhesion.
Finishing: Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.
Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.
Manufacturing decorative kit
The manufacture of a motorcycle decoration kit includes several stages:
Validation of the customer model - The customer validates the design and colors of the decorative kit.
Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.
Drying - The printed vinyl is left to dry to ensure good adhesion.
Hot Lamination of Protective Film - The printed vinyl is coated with a 450 micron protective film to protect the print from scratches and weather damage.
Precise cutouts - The cutout shapes are precise thanks to improved tools for a perfect fit on the motorcycle.
Quality Control- A quality inspection is carried out to ensure that the deco kit conforms to customer specifications and is free from defects.
Sending to the customer - The decorative kit is sent to the customer with tracking and SMS notifications.