50cc MVT Digital Direct motorcycle ignition with personal decoration kit

Tax included Shipping calculated at checkout.

5 in stock

Discover the MVT DD Ignition, a must-have for 50cc motorcycle enthusiasts looking for superior performance. Featuring a lighting power of 55w and a discharge voltage of 42Kv, this ignition is designed to optimize the performance of your engine.

With a maximum rotation speed of 22,000 rpm and a range of use on racing engines of 7000/15000 rpm, the MVT DD Ignition guarantees remarkable performance on the track.

Made with a CNC internal rotor weighing 250g, this ignition is equipped with top quality components, including a rotor, a stator, a diagram, a plate, a HT coil, screws, as well as detailed assembly instructions for installation easy.

The precise timing, compliant with MVT standards ref: RJ34/6,7,8 and EPROM MVT ref: EPROM1,2,3,4,5, ensures optimal operation. Available for the Derbi E3 and Minarelli AM6 engines, this ignition meets the requirements of the most demanding drivers.

Points forts :

  • Lighting power of 55w for increased visibility.
  • Maximum rotation speed of 22,000 rpm for dynamic performance.
  • Robust composition with CNC internal rotor weighing 250g for maximum durability.
  • Precise timing according to MVT standards for optimal engine operation.
  • Compatibility with Derbi E3 and Minarelli AM6 engines for universal adaptation.
How to install a decoration kit

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation: Make sure you have all the necessary materials, including the decorating kit, spatula, spray cleaner, cutter or razor blade, and hair dryer.

Cleaning: Carefully clean the areas where you want to install the deco kit. Be sure to remove all dirt, dust, grease, etc.

Trimming: If necessary, use a razor blade or craft knife to trim the edges.

Apply the first part: Slowly peel the backing from the first part of the deco kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and ensure optimal adhesion.

Finishing: Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

Manufacturing decorative kit

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot Lamination of Protective Film - The printed vinyl is coated with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cutouts - The cutout shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality Control- A quality inspection is carried out to ensure that the deco kit conforms to customer specifications and is free from defects.

Sending to the customer - The decorative kit is sent to the customer with tracking and SMS notifications.