Kit déco 50cc Sherco 2013-2016 Army Blast

€150.00EUR

Vous cherchez à donner un coup de boost à votre Sherco 50cc ? Alors, ne cherchez plus, le Kit déco 50cc Sherco SM 2012-2016 Blast est fait pour vous ! Avec...

Order to receive between and

THERE IS IN STOCK.

SECURE PAYMENT GUARANTEED

amazon paymentsapple paygoogle paymaestromasterpaypalshopify payvisa
Vendor: armysctv
SKU: KD-SHERCO13-BLAST
Barcode:
Availability : In stock In stock Out of stock
Description

Vous cherchez à donner un coup de boost à votre Sherco 50cc ? Alors, ne cherchez plus, le Kit déco 50cc Sherco SM 2012-2016 Blast est fait pour vous ! Avec des graphismes ultra détaillés et une impression haute définition, vous allez faire tourner les têtes sur les pistes. Le vinyle haut de gamme d'une épaisseur de 450 microns est ultra résistant contre les rayures, chocs et intempéries. Et le meilleur dans tout ça, c'est que vous pouvez personnaliser votre kit comme bon vous semble ! Ajoutez un numéro de course, votre nom de pilote, des autocollants de protèges-fourches ou changez les couleurs et sponsors.

Le kit comprend des autocollants pour les flancs, garde-boues, plaque phare, fonds de plaques, bras oscillant et tours de jantes. Transformez votre Sherco en véritable machine de guerre avec le Kit déco 50cc Sherco SM 2012-2016 Blast.

Install a decoration kit

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation : Make sure you have all the necessary materials, including the decoration kit, a spatula, spray cleaner, a cutter or razor blade, and a hair dryer.

Cleaning : Thoroughly clean the areas where you want to install the decoration kit. Be sure to remove all dirt, dust, grease, etc.

Cutting : If necessary, use a razor blade or craft knife to trim the edges.

Apply the first piece: Slowly peel the backing from the first piece of the graphic kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and to ensure optimal adhesion.

Finishing : Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

Fabrication

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot lamination of a protective film - The printed vinyl is covered with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cuts - The cut-out shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality control - A quality inspection is carried out to ensure that the deco kit meets customer specifications and is free from defects.

Sending to customer - The decorative kit is sent to the customer with tracking and SMS notifications.