Kit déco 50cc Fantic Caballero 2013-2016 GB Racing Replica

$167.00 USD

Devenez un pilote de course légendaire avec notre kit déco 50cc GB Racing Replica pour votre Fantic Caballero de 2013 à 2016! Avec des formes qui s'adaptent parfaitement, ce kit est...

Order to receive between and

THERE IS IN STOCK.

SECURE PAYMENT GUARANTEED

amazon paymentsapple paygoogle paymaestromasterpaypalshopify payvisa
Vendor: armysctv
SKU: KD-FANTICCABALLERO-GBRACING
Barcode:
Availability : In stock In stock Out of stock
Description

Devenez un pilote de course légendaire avec notre kit déco 50cc GB Racing Replica pour votre Fantic Caballero de 2013 à 2016! Avec des formes qui s'adaptent parfaitement, ce kit est facile à installer et à mettre en place. Fabriqué avec du vinyle de haute qualité pour une protection ultime, vous pourrez personnaliser votre moto avec des couleurs de course classiques, des sponsors prestigieux, un nouveau garde-boue avant, une plaque phare rapide, un numéro de course digne d'un champion et même votre nom en tant que pilote réplique.

Tous les autocollants nécessaires sont inclus pour un look complet, des ouïes à la plaque phare en passant par les garde-boues, le fond des plaques, les bras oscillants et les tours de jantes. Et avec l'option d'ajouter des autocollants de fourche, votre moto sera la plus proche possible d'une véritable moto de course! Alors, êtes-vous prêt à prendre votre place parmi les plus grands pilotes de course avec votre moto décorée ?

Install a decoration kit

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation : Make sure you have all the necessary materials, including the decoration kit, a spatula, spray cleaner, a cutter or razor blade, and a hair dryer.

Cleaning : Thoroughly clean the areas where you want to install the decoration kit. Be sure to remove all dirt, dust, grease, etc.

Cutting : If necessary, use a razor blade or craft knife to trim the edges.

Apply the first piece: Slowly peel the backing from the first piece of the graphic kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and to ensure optimal adhesion.

Finishing : Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

Fabrication

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot lamination of a protective film - The printed vinyl is covered with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cuts - The cut-out shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality control - A quality inspection is carried out to ensure that the deco kit meets customer specifications and is free from defects.

Sending to customer - The decorative kit is sent to the customer with tracking and SMS notifications.