Derbi Senda Xtreme Army Victory graphic kit

50cc graphic kit for Derbi senda xtreme 2011-2017 fairings. Discover the 50cc Army Victory graphic kit which is available in several colors for plastics of Derbi senda 50cc fairings. Comes with all the stickers to properly cover the Derbi fairings, the frame stickers are also included in the Derbi senda xtreme graphics kit. You can choose between Derbi Senda supermotard or Derbi senda enduro for the stickers intended for rim laps. High definition printing and perfect cutouts to fit easily on your Derbi 50cc fairings. Do not hesitate to buy the deco kit Army Victory to ride your Derbi senda on a daily basis and during 50cc rallies. In order to provide you with high quality stickers, our graphic kits are all made of 450 micron vinyl specially designed for motocross. 3 finishes are also available: glossy, matte or glittery protective film. Stickers included: front and rear mudguards, headlight plate, swing arm, left and right radiator vents, left and right base plate, left and right frame, and supermotard or enduro rim towers.

Why choose an Army sticker graphic kit?
- wash-resistant graphic kit
- UV rays protection
- High opacity vinyl
- Long lasting
- Strong glue< br>- Easy to install thanks to the cut-outs

How to apply the decal kit on Derbi Senda:
- Clean the fairing of the Derbi to remove all traces of grease.
- Lightly spray the fairing with soapy water.
- Heat the sticker with using a hair dryer.
- Apply and position the sticker. (easy to adjust with water).
- Let the decal dry on the Derbi fairing.

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation : Make sure you have all the necessary materials, including the decoration kit, a spatula, spray cleaner, a cutter or razor blade, and a hair dryer.

Cleaning : Thoroughly clean the areas where you want to install the decoration kit. Be sure to remove all dirt, dust, grease, etc.

Cutting : If necessary, use a razor blade or craft knife to trim the edges.

Apply the first piece: Slowly peel the backing from the first piece of the graphic kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and to ensure optimal adhesion.

Finishing : Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot lamination of a protective film - The printed vinyl is covered with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cuts - The cut-out shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality control - A quality inspection is carried out to ensure that the deco kit meets customer specifications and is free from defects.

Sending to customer - The decorative kit is sent to the customer with tracking and SMS notifications.