DRD Pro Derby Graphic decals 2006-2014 Electrify

🔥 Derbi DRD Pro 50cc Electrify deco kit: Energy Recharge for your Ride! 🔥

If you want to give an electrifying boost to your Derbi DRD Pro 50cc 2006-2014, the Electrify Deco Kit is there for that. Here's what will turn you on:

⚡ Style à la Caisse: We're not talking about banal decor here, man. With our kit, you give your bike an electric personality. Top quality vinyl with ultra-strong glue, it's strong!

☀️ Always Green Lights: Thanks to hot lamination, your kit is resistant to everything: UV rays, bad weather, shocks... it always shines brightly, like a beacon in the night!

💥 Explosive Colors: HD printing gives you vibrant colors and top-notch sharpness. Your motorcycle becomes a walking work of art, a real show on two wheels!

🎨 Personalize to the Max: You like customization, right? So, grab this kit to change sponsors, play with colors, add a race number, add your driver name or your Insta... everything is possible!

🛠️ Stickers Galore: To be sure that your Electrify rocks everything, we add stickers for the headlight plate, the supermoto or Enduro rim surrounds, the swinging arm, the base of the plates, and stickers fork optional. Everything is already in the basic package. You just have to take off!

The Derbi DRD Pro 50cc Electrify Deco Kit is full of electric vibes for your ride. Ready to electrify the asphalt and show off your dazzling style? 🏍️💥⚡

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation: Make sure you have all the necessary materials, including the decorating kit, spatula, spray cleaner, cutter or razor blade, and hair dryer.

Cleaning: Carefully clean the areas where you want to install the deco kit. Be sure to remove all dirt, dust, grease, etc.

Trimming: If necessary, use a razor blade or craft knife to trim the edges.

Apply the first part: Slowly peel the backing from the first part of the deco kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and ensure optimal adhesion.

Finishing: Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot Lamination of Protective Film - The printed vinyl is coated with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cutouts - The cutout shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality Control- A quality inspection is carried out to ensure that the deco kit conforms to customer specifications and is free from defects.

Sending to the customer - The decorative kit is sent to the customer with tracking and SMS notifications.