Graphic decals MBK Booster/Yamaha BW's RX BCD Army Camo

The Booster RX BCD Army Camo Deco Kit is a set of decorative vinyls designed to give a unique and military look to your Booster RX BCD scooter. It is made of high quality vinyl with heat lamination for added weather and scratch resistance. It comes with vinyls to cover all fairings, including the complete front end, apron, rocker panels with spoiler, rear sides and wheel arch, as well as fork stickers. The Army Camo design will add an aggressive and military touch to your scooter. It is possible to personalize colors, replace logos, add a driver name or race number.

This scooter decoration kit is ideal for those looking to add a personal touch to their scooter whilst protecting the fairings. It is easy to install and comes in red, gray and white colors that will give a unique camo look to your scooter. The camo design is very trendy and gives an original look to your scooter.

By purchasing this Booster RX BCD Army Camo graphic kit, you will be able to give a new look to your scooter and stand out from the crowd. You will also be able to protect your fairings from scratches and damage caused by bad weather. This kit is ideal for motorcycle enthusiasts looking to add a personal touch to their scooter while protecting the fairings. Order now and make your scooter a real gem with the Booster RX BCD Army Camo Deco Kit.

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation: Make sure you have all the necessary materials, including the decorating kit, spatula, spray cleaner, cutter or razor blade, and hair dryer.

Cleaning: Carefully clean the areas where you want to install the deco kit. Be sure to remove all dirt, dust, grease, etc.

Trimming: If necessary, use a razor blade or craft knife to trim the edges.

Apply the first part: Slowly peel the backing from the first part of the deco kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and ensure optimal adhesion.

Finishing: Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot Lamination of Protective Film - The printed vinyl is coated with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cutouts - The cutout shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality Control- A quality inspection is carried out to ensure that the deco kit conforms to customer specifications and is free from defects.

Sending to the customer - The decorative kit is sent to the customer with tracking and SMS notifications.