Graphic decals MBK Booster / Yamaha Bw's RX BCD Army Fans

Kit déco MBK Booster / Yamaha Bw's RX BCD Army Fans.

We offer you the new Armysctv graphic kit for MBK Booster / Yamaha BW’s RX BCD Army Fans. Designed and developed to cover all the fairings of your Yamaha BW's and MBK Booster with perfection.  At Armysctv, the graphic kit for MBK Booster BCD is printed on self-adhesive vinyl with a thickness of 450 microns in order to resist high pressure washing.

• High opacity vinyl
• Protection UV
• Impression UHD
• Improved die shapes
• Application simple

In order to be able to personalize the fairings of your scooter exactly as you want, you now have the possibility to change the proposed design by choosing your colors and your sponsors. We also offer you a choice of finish. Shiny, matte, glitter, full holographic or full holographic glitter, you decide!

All stickers are included in the MBK Booster RX BCD / Yamaha BW’s RX BCD graphic kit:

• Complete front panel
• Apron
• Underbody with shoe
• Rear flanks
• Tire tracks
• Fork stickers

Order your Army Fans graphic kit for MBK Booster today to give your Scooter a makeover.

Here are the steps to follow to install a 50cc motorcycle graphic kit:

Preparation: Make sure you have all the necessary materials, including the decorating kit, spatula, spray cleaner, cutter or razor blade, and hair dryer.

Cleaning: Carefully clean the areas where you want to install the deco kit. Be sure to remove all dirt, dust, grease, etc.

Trimming: If necessary, use a razor blade or craft knife to trim the edges.

Apply the first part: Slowly peel the backing from the first part of the deco kit and carefully place it on the fairing. Use a spatula to remove air bubbles and to firmly apply the vinyl.

Apply the other pieces: Continue to apply the other pieces of the decorative kit following the same steps as before. Make sure you align them correctly and place them carefully to avoid air bubbles.

Drying: Use a hair dryer to dry the vinyl and ensure optimal adhesion.

Finishing: Once all the pieces are in place, check that the deco kit is installed correctly. If necessary, use a craft knife or razor blade to trim the edges.

Note that every deco kit is different, so there may be variations in the steps mentioned above. Be sure to follow the instructions included with the deco kit for successful installation.

The manufacture of a motorcycle decoration kit includes several stages:

Validation of the customer model - The customer validates the design and colors of the decorative kit.

Printed on high quality vinyl - The design is printed on high quality vinyl to ensure excellent weather resistance and long-term durability.

Drying - The printed vinyl is left to dry to ensure good adhesion.

Hot Lamination of Protective Film - The printed vinyl is coated with a 450 micron protective film to protect the print from scratches and weather damage.

Precise cutouts - The cutout shapes are precise thanks to improved tools for a perfect fit on the motorcycle.

Quality Control- A quality inspection is carried out to ensure that the deco kit conforms to customer specifications and is free from defects.

Sending to the customer - The decorative kit is sent to the customer with tracking and SMS notifications.